APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Instrukcja Użytkownika Pobierz pdf (Strona 60)

60 Audio and MIDI Settings

6.2.4 MIDI Program Changes

String Studio VS responds to MIDI program changes. When a program change is received, the

current program is changed to the program having the same number as that of the program change

message in the currently loaded bank.

If you do not wish String Studio VS to respond to MIDI program changes, open the MIDI

conﬁguration window by clicking on the MIDI button and uncheck the Enable Program Changes

option.

6.2.5 MIDI Bank Changes

In general, MIDI bank numbers are coded using two signals: the MSB (most signiﬁcant byte) and

LSB (least signiﬁcant byte) transmitted using MIDI CC (continuous controller) number 0 and 32

respectively. The way these signals are used differs with different manufacturers.

In the case of String Studio VS, the value of the MSB signal is expected to be zero while the

value of the LSB signal represents the bank number. Banks are therefore numbered from 0 to 127

with this number corresponding to the position of a bank within the list of banks as displayed by

the Bank manager (see Section 3.3). For example, an LSB value of 0 corresponds to the ﬁrst bank

in the bank list while an LSB value of 10 corresponds to the eleventh bank in the list. Note that a

bank change only becomes effective after the reception of a new MIDI program change signal.

If you do not wish String Studio VS to respond to MIDI bank changes, open the MIDI conﬁgu-

ration window by clicking on the MIDI button and uncheck the Enable Bank Changes option.

6.2.6 Pitch bend

The MIDI pitch wheel allows one to vary the pitch of String Studio VS. The pitch wheel can be

moved with the mouse but it is also automatically connected to the pitch wheel signal received

from your MIDI keyboard.

The range of the pitch bend is 2 semi-tones up or down by default but can be changed. To

adjust the range of the pitch bend, open the MIDI conﬁguration window by clicking on the MIDI

button located just below the MIDI let in the top part of the interface and use the Pitch Bend Range

drop-down list to select the range in semi-tones.

6.2.7 Modulation wheel

String Studio VS responds to MIDI modulation (MIDI controller number 1). For more details,

please refer to Section 4.4.8.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67

Brak uwag

APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Instrukcja Użytkownika Strona 60