APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Instrukcja Użytkownika Pobierz pdf (Strona 56)

56 Audio and MIDI Settings

• Move a knob or slider on your MIDI controller (this can be a keyboard, a knob box, or any

device that sends MIDI). This will link the control of the String Studio to the MIDI controller

you just moved.

MIDI links can also be created in the MIDI Links window which is launched by choosing the

Edit MIDILinks command from the Edit menu or by right-clicking/Control-click on any control

and choosing the Edit MIDILinks command.

• Click on New to create a new MIDI link.

• The MIDI controller number speciﬁed in the Controller textbox is set by default to a value

of 1. This is the MIDI controller number corresponding to the modulation wheel. If you

want to assign a new controller to the knob, specify the number here.

• You can also assign a different MIDI channel to the controller in the Channel textbox. By

default this value will be set to channel 1.

6.2.3 Editing MIDI Links

MIDI links can be edited in the MIDI Links window, which lists all the currently available MIDI

links.

• To edit the MIDI link, right-click/Control-click again on the control and choose Edit MIDILinks

to open the MIDI links window. You can also use the Edit MIDILinks command from the

Edit menu.

• Click on the MIDI link you wish to modify and then on the Edit button to launch the EDIT

MIDI Link window.

• Choose the parameter controlled by the current MIDI link from the Parameter drop-down

menu which lists all the parameters of the current module.

• Specify the MIDI controller number and MIDI channel of the physical controller you wish

to link to the parameter in the corresponding textboxes.

• You can also adjust the Minimum Value and Maximum Value of the controller, which

are used to limit the range of MIDI controllers. The Minimum Value ﬁeld determines the

position on the String Studio control which corresponds to the minimum value sent by the

MIDI controller; the Maximum Value determines the position which corresponds to the

maximum value sent by the MIDI controller. A value of 0 corresponds to the String Studio

control minimum position (left position for a knob) and a value of 1 to the String Studio

control maximum position (right position for a knob).

• Note that the range of a knob can be inverted by setting the value of Maximum Value to a

smaller value than that of Minimum Value. This can be useful, for example, if you want to

control the cutoff and the resonance of a ﬁlter with the same knob but you want the resonance

to increase as the cutoff decreases.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 69 70

Brak uwag

APPLIED ACOUSTICS SYSTEMS STRINGSTUDIO Instrukcja Użytkownika Strona 56